Hello Padding - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

graceful-restart restart-wait

before a restarting peer comes up.

hello padding

Use to turn ON or OFF padding for LAN and point-to-point hello PDUs or to selectively turn padding ON

or OFF for LAN or point-to-point hello PDUs.

hello padding [multi-point | point-to-point]

To return to the default, use the no hello padding [multi-point | point-

to-point] command.

point-to-point

Both LAN and point-to-point hello PDUs are padded.

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

IS-IS hellos are padded to the full maximum transmission unit (MTU) size. Padding

IS-IS Hellos (IIHS) to the full MTU provides early error detection of large frame

transmission problems or mismatched MTUs on adjacent interfaces.

isis hello padding

Intermediate System to Intermediate System (IS-IS)

— enables the graceful restart maximum wait time

(OPTIONAL) Enter the keywords multi-point to pad only

LAN hello PDUs.

(OPTIONAL) Enter the keywords point-to-point to pad

only point-to-point PDUs.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

— turns ON or OFF hello padding on an interface basis.