Dell S6000 Reference Manual page 1142

shared-
threshold-
weight
queue 0 to
queue 7
number
Default The default threshold weight on the shared buffer for each queue is 9. Therefore,
each queue can consume up to 66.67 percent of available shared buffer by default.
Command INTERFACE mode
Modes
Command
Version 9.3(0.0)
History
Usage You can configure all the data queues. For S6000, you can configure queues 0-7.
Information
The following table describes the mapping between the threshold weight of the
shared buffer on the queue and the percentage of available shared buffer that is
used by the queue for each of the corresponding threshold weights of the shared
buffer:
shared-threshold-weight on the queue
0
1
2
3
4
5
6
7
8
9
10
11
1142
Specify the weight of a queue for the shared buffer space
Specify the queue number to which the WRED parameters
apply
Enter a weight for the queue on the shared buffer as a
number in the range of 1 to 11.
Introduced on the S6000 platform
% of available shared buffer that
can be consumed by the queue.
No dynamic sharing; shared buffer
= 0.
0.77%
1.54%
3.03%
5.88%
11.11%
20%
33.33%
50%
66.67%
80%
88.89%
Quality of Service (QoS)