Ip Domain-Name - Dell S6000 Reference Manual

Defaults None
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Usage Use this command to associate name server IP addresses to a specific VRF.
Information
Example
•
•
5.5.5.5 6.6.6.6 7.7.7.7

ip domain-name

Configures the default domain corresponding to a specific VRF. This domain is appended to the in
complete DNS requests corresponding to the specified VRF.
Syntax
ip domain-name [vrf vrf-name] name
To undo the domain name configuration corresponding to a specific VRF, use the
no ip domain-name [vrf vrf-name] name command.
Parameters
vrf vrf-name
name
Defaults None
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Dynamic Host Configuration Protocol (DHCP)
Introduced on the S-Series and Z-Series.
Dell(conf)#ip name-server vrf jay 2.2.2.2
Dell(conf)#ip name-server vrf jay 2.2.2.2 3.3.3.3 4.4.4.4
(Optional) Enter the key word vrf and then the name of the
VRF to configure the domain corresponding to that VRF.
Enter the name of the domain to be appended to the in
complete DNS requests corresponding to the specified VRF.
Introduced on the S-Series and Z-Series.
547