Show Qos Policy-Map - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

Version 8.3.11.1

Version 8.3.7.0

Dell#show qos class-map

Class-map match-any CM

show qos policy-map

View the QoS policy map information.

show qos policy-map {summary [interface] | detail}

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Quality of Service (QoS)

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Match ip access-group ACL

— identifies the class map.

To view a policy map interface summary, enter the keyword

summary and optionally one of the following keywords and

slot/port or number information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

To view a policy map interface in detail, enter the keyword

detail and optionally one of the following keywords and

slot/port or number information:

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

EXEC Privilege