Default-Information Originate - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

EXEC Privilege

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.2(0.2)

Version 9.0.2.0

Version 6.3.1.0

default-information originate

Generates a default route into an IS-IS routing domain and controls the distribution of default

information.

default-information originate [always] [metric metric] [route-

map map-name]

To disable the generation of a default route into the specified IS-IS routing domain,

use the no default-information originate [always] [metric metric]

[route-map map-name] command.

metric metric

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Gigabit Ethernet interface, enter the keyword

GigabitEthernet the slot/port information.

For a Port Channel interface, enter the keywords port-

channel then a number. The range is from 1 to 128.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a VLAN, enter the keyword vlan then a number from

Introduced on the Z9000.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

(OPTIONAL) Enter the keyword always to have the default

route always advertised.

(OPTIONAL) Enter the keyword metric then a number to

assign to the route. The range is from 0 to 16777215.

Intermediate System to Intermediate System (IS-IS)