Graceful-Restart Helper-Reject - Dell S6000 Reference Manual

graceful-restart helper-reject

Specify the OSPF router to not act as a helper during graceful restart.
S6000
Syntax
graceful-restart helper-reject ip-address
To return to default value, use the no graceful-restart helper-reject
command.
Parameters
ip-address
Defaults Not configured.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version
8.3.12.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
graceful-restart mode
Enable the graceful restart mode.
S6000
Syntax
graceful-restart mode [planned-only | unplanned-only]
984
Enter the OSPF router-id, in IP address format, of the restart
router that will not act as a helper during graceful restart.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Restart role enabled on the S-Series (Both Helper and
Restart roles now supported on S-Series). Added support
for Multi-Process OSPF.
Added Helper-Role support on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)