show config
View the current configuration for the mode. Only non-default values are displayed.
S6000
Syntax
show config
Command
CONFIGURATION RSTP (conf-rstp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
Example
Dell(conf-rstp)#show config
!
protocol spanning-tree rstp
show spanning-tree rstp
Display the RSTP configuration.
S6000
Syntax
show spanning-tree rstp [brief] [guard]
Parameters
brief
guard
Rapid Spanning Tree Protocol (RSTP)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
no disable
bridge-priority 16384
(OPTIONAL) Enter the keyword brief to view a synopsis of
the RSTP configuration information.
(OPTIONAL) Enter the keyword guard to display the type of
guard enabled on an RSTP interface and the current port
state.
1213