Ip Ssh Key-Size - Dell S6000 Reference Manual

Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
If you enable this command, clients can log in without a password prompt. This
Information
command provides two levels of authentication:
•
•
Related
ip ssh pub-key-file
Commands
ip ssh rhostsfile

ip ssh key-size

Configure the size of the server-generated RSA SSHv1 key.
S6000
Syntax
ip ssh key-size 512-869
Parameters
512-869
Defaults Key size 768
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Security
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
rhost-authentication is done with the file specified in the ip ssh rhostfile
command.
checking client host-keys is done with the file specified in the ip ssh pub-
key-file command.
NOTE: Administrators must specify the two files (rhosts and pub-key-file)
to configure host-based authentication.
— public keys of trusted hosts from a file.
— trusted hosts and users for rhost authentication.
Enter the key-size number for the server-generated RSA
SSHv1 key. The range is from 512 to 869. The default is 768.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
1285