Isis Ipv6 Metric - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

hello padding

isis ipv6 metric

Assign metric to an interface for use with IPv6 information.

isis ipv6 metric default-metric [level-1 | level-2]

To return to the default values, use the no ipv6 isis metric [default-

metric] [level-1 | level-2] command.

default-metric

default-metric = 10; level-1 (if not otherwise specified)

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 7.5.1.0

— turns ON or OFF padding for LAN and point-to-point hello PDUs.

Metric assigned to the link and used to calculate the cost

from each other router via the links in the network to other

destinations. You can configure this metric for Level 1 or

Level 2 routing. The range is from 0 to 16777215. The default

(OPTIONAL) Enter the keywords level-1 to configure the

shortest path first (SPF) calculation for Level 1 (intra-area)

routing. This value is the default.

(OPTIONAL) Enter the keywords level-2 to configure the

SPF calculation for Level 2 (inter-area) routing.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the S4810.

Introduced on the Z9000.

Introduced on the E-Series.

Intermediate System to Intermediate System (IS-IS)