Show Ip Ospf Statistics - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

150.150.150.0

show ip ospf statistics

Display OSPF statistics.

show ip ospf [process-id | vrf vrf-name] statistics global |

[interface name {neighbor router-id}]

vrf vrf-name

interface name

Enter the OSPF Process ID to show a specific process. If no

Process ID is entered, command applies only to the first

OSPF process.

Enter the keyword vrf followed by the name of the VRF to

display statistics corresponding to the OSPF process that is

tied to a specific VRF.

Enter the keyword global to display the packet counts

received on all running OSPF interfaces and packet counts

OSPF neighbors receive and transmit.

(OPTIONAL) Enter the keyword interface then one of the

following interface keywords and slot/port or number

information:

For a 1-Gigabit Ethernet interface, enter the keyword

GigabitEthernet then the slot/port information.

For Port Channel groups, enter the keywords port-

channel then a number. For the C-Series and S-Series,

the range is from 1 to 128.

For a SONET interface, enter the keyword sonet then the

slot/port information.

For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet then the slot/port information.

For a VLAN, enter the keyword vlan then a number from

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

(OPTIONAL) Enter the keyword neighbor then the

neighbor's router-id in dotted decimal format (A.B.C.D.).

EXEC Privilege

Open Shortest Path First (OSPFv2 and OSPFv3)