Peer-Domain-Link Port-Channel Exclude-Vlan - Dell S6000 Reference Manual

Command VLT DOMAIN PROXY GW STATIC
Modes
Command
Version 9.4(0.0)
History
Usage You can configure the remote MAC address of the VLT peer to be associated with
Information the static VLT proxy gateway and exclude a VLAN or a range of VLANs from proxy
routing. This parameter is for a static VLT proxy gateway configuration.
Example
Dell(conf)#vlt-domain 1
Dell(conf-vlt-domain#proxy-gateway static
Dell(conf-vlt-domain-proxy-gw-static)#remote-mac-address
00:01:e8:06:95:ac exclude-vlan 3

peer-domain-link port-channel exclude-vlan

Configure proxy-gateway LLDP, specify a port-channel and a VLAN or range of VLANs, and exclude a
VLAN or a range of VLANs from proxy routing.
S6000
Syntax
[no] peer-domain-link port-channel interface-identifier
exclude-vlan vlan-range
Parameters
port-channel
vlan-range
Command VLT DOMAIN PROXY GW LLDP
Modes
Command
Version 9.4(0.0)
History
Usage You can configure the port channel interface that must be associated with the
Information LLDP proxy gateway and exclude a VLAN or a range of VLANs from proxy routing.
This parameter is for an LLDP proxy gateway configuration.
1456
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
Configure the proxy-gateway interface port-channel. Port
channel range is from 1 to 128.
Enter the member VLANs using comma-separated VLAN IDs,
a range of VLAN IDs, a single VLAN ID, or a combination. For
example:
Comma-separated: 3, 4, 6
Range: 5-10
Combination: 3, 4, 5-10, 8
Introduced on the S4810, S4820T, S6000, Z9000, and MXL
Switch.
VLT Proxy Gateway