Dell S6000 Reference Manual page 618

Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command.
Usage This command displays the IGMP database, including configured entries for either
Information all groups on all interfaces, all groups on specific interfaces, or specific groups on
specific interfaces.
The following describes the show ip igmp groups command shown in the
following example.
Field
Group Address
Interface
Mode
Uptime
Expires
Last Reporter
Member Ports
Example
Dell#show ip igmp groups
Total Number of Groups: 5
IGMP Connected Group Membership
Group Address Interface Mode Uptime Expires Last Reporter
225.0.0.0
Member Ports: Po 2
225.0.0.1
Member Ports: Po 2
225.0.0.2
Member Ports: Po 2
225.0.0.3
Member Ports: Po 2
225.0.0.4
Member Ports: Po 2
Example (VLT)
Dell#show ip igmp groups
Total Number of Groups: 5
IGMP Connected Group Membership
618
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series and C-Series.
Expanded to support the detail option.
Description
Lists the multicast address for the IGMP group.
Lists the interface type, slot and port number.
Displays the IGMP version used.
Displays the amount of time the group has been
operational.
Displays the amount of time until the entry expires.
Displays the IP address of the last host to be a member of
the IGMP group.
Indicates the port channel. If the port channel is VLT, an
asterisk (*) after the port channel number indicates the port
channel is locally down and that a remote VLT port is up.
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
Vlan 100 IGMPv2 00:00:05 00:02:04 3.0.0.51
NOTE: The asterisk (*) after the port channel number (Po 2) highlighted in the
following example indicates the port channel is VLT, that the local VLT port
channel is down and the remote VLT port is up.
Internet Group Management Protocol (IGMP)