adv-router ip-
address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.20
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
Usage
The following describes the show ip ospf process-id database router
Information
command shown in the following example.
Item
LS Age
Options
1026
•
the router's OSPF router ID for Type 1 LSAs or Type 4
LSAs
•
the default destination (0.0.0.0) for Type 5 LSAs
(OPTIONAL) Enter the keywords adv-router followed by
the IP address of an Advertising Router to display only the
LSA information about that router.
EXEC
EXEC Privilege
Added supported for VRF.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Description
Displays the LSA age.
Displays the optional capabilities available on router. The
following options can be found in this item:
•
TOS-capability or No TOS-capability is displayed
depending on whether the router can support Type of
Service.
•
DC or No DC is displayed depending on whether the
originating router can support OSPF over demand
circuits.
Open Shortest Path First (OSPFv2 and OSPFv3)