Show Ip Management-Route - Dell S6000 Reference Manual

Fields
Interface
IP-Address
Ok?
Method
Status
Protocol
Example (Brief)
Dell#show ip int brief
Interface
Status
GigabitEthernet 1/0
down down
GigabitEthernet 1/1
down down
GigabitEthernet 1/2
up
GigabitEthernet 1/3
up
GigabitEthernet 1/4
up
GigabitEthernet 1/5
up
GigabitEthernet 1/6
down down

show ip management-route

View the IP addresses assigned to the Management interface.
S6000
Syntax
show ip management-route [all | connected | summary | static]
Parameters
all
connected
summary
758
Description
Displays type of interface and the associated slot and port
number.
Displays the IP address for the interface, if configured.
Indicates if the hardware is functioning properly.
Displays "Manual" if the configuration is read from the saved
configuration.
States whether the interface is enabled (up) or disabled
(administratively down).
States whether IP is enabled (up) or disabled (down) on the
interface.
IP-Address OK? Method
Protocol
unassigned NO
unassigned NO
unassigned YES Manual
up
unassigned YES Manual
up
unassigned YES Manual
up
10.10.10.1 YES Manual
up
unassigned NO
(OPTIONAL) Enter the keyword all to view all IP addresses
assigned to all Management interfaces on the switch.
(OPTIONAL) Enter the keyword connected to view only
routes directly connected to the Management interface.
(OPTIONAL) Enter the keyword summary to view a table
listing the number of active and non-active routes and their
sources.
Manual administratively
Manual administratively
Manual administratively
IPv4 Routing