Version - Dell S6000 Reference Manual

Command ROUTER RIP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Usage If you change the timers on one router, also synchronize the timers on all routers
Information in the RIP domain.
version
Specify either RIP version 1 or RIP version 2.
S6000
Syntax
version {1 | 2}
To return to the default version setting, use the no version command.
Parameters
1
2
Defaults The Dell Networking OS sends RIPv1 and receives RIPv1 and RIPv2.
Command ROUTER RIP
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Routing Information Protocol (RIP)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword 1 to specify RIP version 1.
Enter the keyword 2 to specify RIP version 2.
1187