Dell S6000 Reference Manual page 896

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

Dell#sh fefd

FEFD is globally 'ON', interval is 10 seconds, mode is

'Aggressive'.

INTERFACE MODE

Displays the interfaces type and number.

Displays the mode (aggressive or normal) or NA if the

interface contains fefd reset in its configuration.

Displays the interval between FEFD packets.

Displays the state of the interface and can be one of the

bi-directional (interface is up, connected and hearing

neighbor's echoes).

err-disabled (only found when FEFD mode is aggressive

and when the interface has not hearing its neighbor's

echoes for three times the message interval. To reset an

interface in this state, use the fefd reset command.)

unknown (only found when FEFD mode is normal.

locally disabled (interface contains the fefd reset

command in its configuration).

Admin Shutdown (interface is disabled with the

shutdown command).

— enables far-end failure detection.

fefd disable

— disables FEFD on an interface only.

— enables FEFD globally on the system.

— resets all interfaces or a single interface that was in "error-disabled"

Admin Shutdown

Locally disabled

Err-disabled