Dell S6000 Reference Manual page 745

ip ip-address
mask
inspection
macaddress
mac-address
mask
static
retries
dynamic
summary
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.5.1.0
Version 8.3.7.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.9.1.0
Version 7.8.1.0
IPv4 Routing
(OPTIONAL) Enter the keyword ip then an IP address in the
dotted decimal format. Enter the optional IP address mask in
the slash prefix format (/ x).
Enter the keyword inspection with one of the following
keywords to view ARP entries:
• database — view a list of ARP entries learned using DAI
• statistics — view DAI statistics
(OPTIONAL) Enter the keyword macaddress then a MAC
address in nn:nn:nn:nn:nn:nn format. Enter the optional
MAC address mask in nn:nn:nn:nn:nn format also.
(OPTIONAL) Enter the keyword static to view entries
entered manually.
(OPTIONAL) Enter the keyword retries to show the
number of ARP retries before a 20–second back off.
(OPTIONAL) Enter the keyword dynamic to view dynamic
entries.
(OPTIONAL) Enter the keyword summary to view a summary
of ARP entries.
Added support for VRF and added usage information for the
clear arp-cache command.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Introduced on the S4810.
Added support for 4094 VLANs on the E-Series ExaScale (the
prior limit was 2094).
Introduced on the E-Series ExaScale.
Introduced VRF on the E-Series.
Augmented to display local ARP entries learned from private
VLANs (PVLANs).
745