Dell S6000 Reference Manual page 675

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

linecard slot-

stack-unit slot-

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

Version 8.5.1.0

Version 8.1.1.0

Version 7.6.1.0

Version 7.5.1.0

Dell#show interfaces status

1502,1504,1506-1508,1602

For a 40-Gigabit Ethernet interface, enter the keyword

fortyGigE then the slot/port information.

For a Loopback interface, enter the keyword loopback

then the slot/port information. The range is from 0 to

For a Port-Channel interface, enter the keyword port-

channel then the slot/port information. The range is

from 0 to 128.

(OPTIONAL) Enter the keyword linecard then the slot

(OPTIONAL) Enter the keyword stack-unit then the slot

number. The range is from 0 to 5.

EXEC Privilege

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.

Added support for 4-port 40G line cards on ExaScale.

Introduced on the E-Series ExaScale.

Introduced on the S-Series.

Introduced on the C-Series.

Introduced on the E-Series.

1000 Mbit Auto

1000 Mbit Auto

1000 Mbit Auto