Service Password-Encryption - Dell S6000 Reference Manual

lower number
numeric
number
special-char
number
Defaults none
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0)
Version 9.2(1.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.3.1.0
Related password
Commands

service password-encryption

Encrypt all passwords configured in Dell Networking OS.
S6000
Syntax
service password-encryption
To store new passwords as clear text, use the no service password-
encryption command.
Defaults Enabled.
Security
(OPTIONAL) Enter the keyword lower then the lower
number. The range is from 0 to 31.
(OPTIONAL) Enter the keyword numeric then the numeric
number. The range is from 0 to 31.
(OPTIONAL) Enter the keywords special-char then the
number of special characters permitted. The range is from 0
to 31.
Introduced lockout-period option on the Z9000, S6000,
S4820T, S4810, and MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— specifies a password for users on terminal lines.
1243