Show Vlt Mismatch - Dell S6000 Reference Manual

show vlt mismatch

Display mismatches in VLT parameters.
S6000
Syntax
show vlt mismatch
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version 9.2(0.0)
Version 9.2(0.2)
Example
Dell#show vlt mismatch
Domain
-----------
Parameters
------------
Vlan-config
------------
Vlan-ID
---------
Vlan IPV4 Multicast Status
--------------------------
Dell#
Virtual Link Trunking (VLT)
Introduced on the S6000.
Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Introduced on the Z9000, S4810, and S4820T.
Local
-----------
Unit-ID 0
Local Mode
------------ -----------
100
Vlan-ID Local Status
-------- ------------
4094
Peer
---------
15
Peer Mode
--
Peer Status
-----------
Active
L3
Inactive
1473