Clear Config - Dell S6000 Reference Manual

Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Usage
To prevent the link state database from receiving incorrect routing information
Information
from unauthorized routers, use the area-password command on routers within
an area.
The configured password injects into Level 1 LSPs, CSNPs, and PSNPs.
Related
•
Commands
•

clear config

Clear IS-IS configurations that display under the router isis heading of the show running-config
command output.
S6000
Syntax
clear config
Command ROUTER ISIS
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.1
Usage
Information
Intermediate System to Intermediate System (IS-IS)
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
domain-password — allows you to set the authentication password for a
routing domain.
isis password — allows you to configure an authentication password for an
interface.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
CAUTION: Use caution when you enter this command. Back up your
configuration prior to using this command or your IS-IS configuration will
be erased.
791