Username - Dell S6000 Reference Manual

Defaults See the defaults settings shown in Parameters.
Command LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage The software measures the period of inactivity defined in this command as the
Information period between consecutive keystrokes. For example, if your password is
"password" you can enter "p" and wait 29 seconds to enter the next letter.

username

Establish an authentication system based on user names.
S6000
Syntax
username name [access-class access-list-name] [nopassword |
{password | secret} [encryption-type] password] [privilege
level] [role role-name]
If you do not want a specific user to enter a password, use the nopassword
option.
To delete authentication for a user, use the no username name command.
Parameters
name
access-class
access-list-
name
Security
• AUX: the range is from 1 to 300 seconds, the default is 0
seconds (no timeout).
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter a text string for the name of the user up to 63
characters.
Enter the keywords access-class then the name of a
configured access control list (either an IP access control list
or MAC access control list).
1247