Show Vlt Statistics - Dell S6000 Reference Manual

show vlt statistics

Displays statistics on VLT operations.
S6000
Syntax
show vlt statistics [arp | domain | igmp-snoop | mac |
multicast | ndp]
Parameters
domain
multicast
mac
arp
igmp-snoop
ndp
Default Not configured.
Command EXEC
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2)
Version 9.0.2.0
Version 9.0.0.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.8.0
Related clear vlt statistics
Commands
Example
Dell_VLTpeer1#show vlt statistics
VLT Statistics
----------------
HeartBeat Messages Sent:
HeartBeat Messages Received: 909
ICL Hello's Sent:
Virtual Link Trunking (VLT)
Display the VLT statistics for the domain.
Display the VLT statistics for multicast.
Display the VLT statistics for the MAC address.
Display the VLT statistics for ARP.
Display the VLT statistics for IGMP snooping.
Display the VLT statistics for NDP.
Added parameters multicast and ndp
Introduced on the S6000.
Introduced on the Z9000.
Introduced on the S4820T.
Added support in the output for ARP, MAC, and IGMP
snooping.
Introduced on the S4810.
— clears the statistics on VLT operations.
NOTE: The following example shows the statistics for all of the VLT
parameters. If you enter a specific keyword, such as mac, only the statistics for
that VLT parameter displays.
930
927
1475