Clear Vlt Statistics - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.2(0.0)

Version 9.2(0.2)

Version 9.0.2.0

Version 9.0.0.0

Version 8.3.8.0

clear vlt statistics

Clear the statistics on VLT operations.

clear vlt statistics [arp | domain | igmp-snoop | mac |

multicast | ndp]

Virtual Link Trunking (VLT)

Enter the keyword ipv6 then an IPv6 address in the

X:X:X:X::X format.

Enter the keyword interval to specify the time interval to

send hello messages. The range is from 1 to 5 seconds. The

default is 1 second.

Introduced on the M I/O Aggregator. This command is

supported in Programmable-Mux (PMUX) mode only.

Added support for IPv6.

Introduced on the S6000.

Introduced on the Z9000.

Introduced on the S4820T.

Introduced on the S4810.

Clear the VLT statistics for the domain.

Clear the VLT statistics for multicast.

Clear the VLT statistics for the MAC address.

Clear the VLT statistics for ARP.

Clear the VLT statistics for IGMP snooping.

Clear the VLT statistics for NDP.