Aaa Authentication Enable - Dell S6000 Reference Manual

aaa authentication enable

Configure AAA Authentication method lists for user access to EXEC privilege mode (the "Enable" access).
S6000
Syntax
aaa authentication enable {default | method-list-name} method
[... method2]
To return to the default setting, use the no aaa authentication enable
{default | method-list-name} method [... method2] command.
Parameters
default
method-list-
name
method
... method2
Defaults Use the enable password.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
1232
Enter the keyword default then the authentication
methods to use as the default sequence of methods for the
Enable login. The default is default enable.
Enter a text string (up to 16 characters long) to name the list
of enabled authentication methods activated at login.
Enter one of the following methods:
• enable: use the password the enable password
command defines in CONFIGURATION mode.
• line: use the password the password command defines
in LINE mode.
• none: no authentication.
• radius: use the RADIUS servers configured with the
radius-server host command.
• tacacs+: use the TACACS+ server(s) configured with the
tacacs-server host command.
(OPTIONAL) In the event of a "no response" from the first
method, Dell Networking OS applies the next configured
method.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Security