Forward-Delay - Dell S6000 Reference Manual

forward-delay

Configure the amount of time the interface waits in the Listening State and the Learning State before
transitioning to the Forwarding State.
S6000
Syntax
forward-delay seconds
To return to the default setting, use the no forward-delay command.
Parameters
seconds
Defaults 15 seconds
Command CONFIGURATION RSTP (conf-rstp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
Related
hello-time
Commands
max-age
configuration information.
Rapid Spanning Tree Protocol (RSTP)
Enter the number of seconds that FTOS waits before
transitioning RSTP to the forwarding state. The range is from
4 to 30. The default is 15 seconds.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— changes the time interval between BPDUs.
— changes the wait time before RSTP refreshes the protocol
1209