Dell S6000 Reference Manual page 491

Instance 3 Instance 4 Instance 5
30S
---------------------------------------------------------------
------------------------------------------------
UCAST
6
UCAST
1
UCAST
2
MCAST
0
If only two instances are available at the time the above show command is issued,
only two instances will be displayed in the summary output.
---------------------------------------------------------------
------------------------------------------------
Q# TYPE
---------------------------------------------------------------
------------------------------------------------
UCAST
1
UCAST
UCAST
MCAST
Dell#show hardware stack-unit 0 buffer-stats-snapshot unit 0
resource port 5 prio-group all history summary
Stack-unit 0 unit 0 port 5 (interface te 0/4)
---------------------------------------------------------------
------------------------------------------------
PG#
Instance 4
Shared Hdrm [in CELLS]
---------------------------------------------------------------
------------------------------------------------
6
0
1
7
0
In the following example, the Headroom Cells field indicates the amount of shared
buffer area that is allocated to store packets that are received after the pause frame
is received or a priority-based flow control pause frame is enabled. When an
inbound interface halts the sending of traffic, it must have the buffer space to save
all of the packets currently in the buffer, and also all of the packets that were
received before the device stops the sending of packets. Headroom space is used
Data Center Bridging (DCB)
40S
2 5
0
3 2
5
11 0
0
4 0
0
Q#
2 5
3 2
11 0
4 0
Instance 1 Instance 2
Instance 5
Shared Hdrm Shared Hdrm
9 2
4 1
0 0
0 0
10S
50S
4
1
0
0
3
3
0
3
TOTAL BUFFERED CELLS
Instance 1 Instance 2
10S
4
0
3
0
Instance 3
Shared Hdrm
0 0
7
0 0
0 0
20S
20S
Shared Hdrm
1
1
491