Show Privilege - Dell S6000 Reference Manual

Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage
Information
To keep unauthorized people from viewing passwords in the switch configuration
file, use the service password-encryption command. This command
encrypts the clear-text passwords created for user name passwords, authentication
key passwords, the privileged command password, and console and virtual
terminal line access passwords.
To view passwords, use the show running-config command.

show privilege

View your access level.
S6000
Syntax
show privilege
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1244
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
CAUTION: Encrypting passwords with this command does not provide a
high level of security. When the passwords are encrypted, you cannot return
them to plain text unless you re-configure them. To remove an encrypted
password, use the no password password command.
EXEC
EXEC Privilege
Security