Ip Ssh Server Vrf - Dell S6000 Reference Manual

Version 9.5(0.0)
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
pre-Version
6.1.1.0
Usage This command enables the SSH server and begins listening on a port. If a port is
Information not specified, listening is on SSH default port 22.
Example
Dell# conf
Dell(conf)# ip ssh server port 45
Dell(conf)# ip ssh server enable
Dell#
Related show ip ssh
Commands

ip ssh server vrf

Configure an SSH server on either a specific VRF or a management VRF.
Syntax
ip ssh server vrf {management | vrf-name}
To disable the SSH server configuration, use the no ip ssh server vrf
{management | vrf-name} command.
Parameters
vrf
management
vrf vrf-name
Security
Introduced the cipher, kex and mac options on the Z9000,
S6000, S4820T, S4810, and MXL.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
NOTE: Starting with Dell Networking OS Release 9.2(0.0), SSH server is
enabled by default.
— displays the ssh information.
NOTE: Some of the parameters in this command require licensing to access.
For more information, contact your Dell Networking representative.
Enter the key word vrf followed by the keyword
management to configure an SSH server on a management
VRF.
Enter the key word vrf followed by the VRF name to
configure an SSH server on that VRF.
1293