Dot1X Reauth-Max - Dell S6000 Reference Manual

Version 7.4.1.0
Related interface range
Commands

dot1x reauth-max

Configure the maximum number of times a port can re-authenticate before the port becomes
unauthorized.
S6000
Syntax
dot1x reauth-max number
To return to the default, use the no dot1x reauth-max command.
Parameters
number
Defaults 2
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.4.1.0
dot1x server-timeout
Configure the amount of time after which exchanges with the server time-out.
S6000
Syntax
dot1x server-timeout seconds
To return to the default, use the no dot1x server-timeout command.
Security
Introduced on the E-Series.
— configures a range of interfaces.
Enter the permitted number of re-authentications. The range
is from 1 to 10. The default is 2.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series and S-Series.
Introduced on the E-Series.
1275