Clear Hardware System-Flow - Dell S6000 Reference Manual

cpu party-bus
statistics
stack-port
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.0
Version 8.3.7.0
Version 7.8.1.0
Related show hardware stack-unit
Commands and output statistics of the designated component of the designated stack
member.

clear hardware system-flow

Clear system-flow statistics from selected hardware components.
S6000
Syntax
clear hardware system-flow layer2 stack-unit number port-set 0–
0 counters
Parameters
stack-unit
number
port-set 0–0
counters
Defaults none
508
Enter the keywords cpu party-bus statistics to clear
the management statistics.
Enter the keywords stack-port then the port number of
the stacking port to clear the statistics of the particular
stacking port. The range is 0 to 127 for the S6000.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
— displays the data plane or management plane input
Enter the keywords stack-unit then a number to select a
particular stack member and then enter one of the following
command options to clear a specific collection of data. The
range is 0 to 5 for the S6000.
Enter the keywords port-set along with a port-pipe
number, then the keyword counters to clear the system-flow
counters on the selected port-pipe. The range is 0 to 0 for
the S6000.
Debugging and Diagnostics