Tagged - Dell S6000 Reference Manual

Example
(OpenFlow
*
instance)
O
O
O
Related
vlan-stack compatible
Commands
VLAN.
interface vlan

tagged

Add a Layer 2 interface to a VLAN as a tagged interface.
S6000
Syntax
tagged interface
To remove a tagged interface from a VLAN, use the no tagged interface
command.
Parameters
interface
Defaults All interfaces in Layer 2 mode are untagged.
Command INTERFACE VLAN
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.5.1.0
884
NUM Status Description
1 Inactive
3 Inactive
6 Inactive
8 Inactive
12 Inactive
— enables the Stackable VLAN feature on the selected
— configures a VLAN.
Enter the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Added support for 4-port 40G line cards on ExaScale.
Q Ports
O Te 0/10
Layer 2