Show Ntp Status - Dell S6000 Reference Manual

Field
remote
ref clock
st
when
poll
reach
delay
offset
disp
Example
Dell#show ntp associations
remote
=============================================================
10.10.120.5 0.0.0.0
*172.16.1.33 127.127.1.0 11 6 16
104.16
172.31.1.33 0.0.0.0
192.200.0.2 0.0.0.0
* master (synced), # master (unsynced), + selected, - candidate
Dell#
Related

show ntp status

Commands
show ntp status
Display the current NTP status.
S6000
Syntax
show ntp status
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
1424
Description
• ~ means the peer is statically configured.
Displays the remote IP address of the NTP peer.
Displays the IP address of the remote peer's reference clock.
Displays the peer's stratum, that is, the number of hops
away from the external time source. A 16 in this column
means the NTP peer cannot reach the time source.
Displays the last time the switch received an NTP packet.
Displays the polling interval (in seconds).
Displays the reachability to the peer (in octal bitstream).
Displays the time interval or delay for a packet to complete
a round-trip to the NTP time source (in milliseconds).
Displays the relative time of the NTP peer's clock to the
switch clock (in milliseconds).
Displays the dispersion.
ref clock
— displays the current NTP status.
EXEC
EXEC Privilege
st when poll reach delay
16 - 256
16 - 256
16 - 256
offset disp
0 0.00 0.000 16000.0
377 -0.08 -1499.9
0 0.00 0.000 16000.0
0 0.00 0.000 16000.0
System Time and Date