Version 8.3.7.0
pre-7.7.1.0
Related
protocol spanning-tree rstp
Commands
disable
Disable RSTP globally on the system.
S6000
Syntax
disable
To enable Rapid Spanning Tree Protocol, use the no disable command.
Defaults
RSTP is disabled.
Command
CONFIGURATION RSTP (conf-rstp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.6.1.0
Version 7.5.1.0
Version 6.2.1.1
Related
protocol spanning-tree rstp
Commands
1208
Introduced on the S4810.
Introduced.
— enters SPANNING TREE mode on the switch.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
— enters SPANNING TREE mode on the switch.
Rapid Spanning Tree Protocol (RSTP)