Mode - Dell S6000 Reference Manual

Version 8.3.7.0
Version 8.2.1.0
Version 7.4.1.0

mode

Set the Master or Transit mode of the ring.
S6000
Syntax
mode {master | transit}
To reset the mode, use the no mode {master | transit} command.
Parameters
master
transit
Defaults Mode None
Command CONFIGURATION (conf-frrp)
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.2.1.0
Version 7.4.1.0
586
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
Enter the keyword master to set the Ring node to Master
mode.
Enter the keywordtransit to set the Ring node to Transit
mode.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the C-Series.
Introduced.
Force10 Resilient Ring Protocol (FRRP)