Show Ip Pim Rp - Dell S6000 Reference Manual

Field
Interface
Uptime/expires
Ver
DR prio/Mode
Example
Dell#show ip pim neighbor
Neighbor
Address
127.87.3.4 Gi 7/16
Dell#

show ip pim rp

View all multicast groups-to-RP mappings.
S6000
Syntax
show ip pim rp [mapping | group-address]
Parameters
mapping
group-address
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1072
Description
List the interface type, with either slot/port information or ID
(VLAN or Port Channel), on which the PIM neighbor was
found.
Displays the amount of time the neighbor has been up then
the amount of time until the neighbor is removed from the
multicast routing table (that is, until the neighbor hold time
expires).
Displays the PIM version number.
• v2 = PIM version 2
Displays the Designated Router priority and the mode.
• 1 = default Designated Router priority (use the ip pim
dr-priority command)
• DR = Designated Router
• S = Sparse mode
Interface
(OPTIONAL) Enter the keyword mapping to display the
multicast groups-to-RP mapping and information on how
RP is learnt.
(OPTIONAL) Enter the multicast group address mask in
dotted decimal format to view RP for a specific group.
EXEC
EXEC Privilege
Uptime/Expires
09:44:58/00:01:24
Ver DR
Prio/Mode
v2 1 / S
PIM-Sparse Mode (PIM-SM)