Dell S6000 Reference Manual page 677

Version 8.5.1.0
Version 8.2.1.0
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series legacy
command
Usage The following describes the show interfaces switchport command for the
Information
following example.
Items
Name
802.1QTagged
Vlan membership
Example
Dell#show interfaces switchport
Name: GigabitEthernet 13/0
802.1QTagged: Hybrid
Vlan membership:
Vlan
Native VlanId: 20
Name: GigabitEthernet 13/1
802.1QTagged: True
Vlan membership:
Vlan
Name: GigabitEthernet 13/2
802.1QTagged: True
Vlan membership:
Vlan
Name: GigabitEthernet 13/3
802.1QTagged: True
Vlan membership:
Vlan
--More--
Related
interface
Commands
show ip interface
show interfaces
interface.
Interfaces
Added support for 4-port 40G line cards on ExaScale.
Added support for 4093 VLANs on E-Series ExaScale.
Introduced on the E-Series ExaScale.
Support added for hybrid port/native VLAN, introduced on
the S-Series.
Introduced on the C-Series.
Description
Displays the interface's type, slot, and port number.
Displays whether if the VLAN tagged ("True"), untagged
("False"), or hybrid ("Hybrid"), which supports both untagged
and tagged VLANs by port 13/0.
Lists the VLANs to which the interface is a member. Starting
with Dell Networking OS version 7.6.1, this field can display
native VLAN membership by port 13/0.
2, Vlan 20
2
2
2
— configures a physical interface on the switch.
— displays Layer 3 information about the interfaces.
— displays information on a specific physical interface or virtual
677