Debug Spanning-Tree Rstp - Dell S6000 Reference Manual

Related protocol spanning-tree rstp
Commands

debug spanning-tree rstp

Enable debugging of RSTP and view information on the protocol.
S6000
Syntax
debug spanning-tree rstp [all | bpdu interface {in | out} |
events]
To disable debugging, use the no debug spanning-tree rstp command.
Parameters
all
bpdu interface
{in | out}
events
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
1206
— enters rapid spanning tree mode.
(OPTIONAL) Enter the keyword all to debug all spanning
tree operations.
(OPTIONAL) Enter the keyword bpdu to debug the bridge
protocol data units.
(OPTIONAL) Enter the keyword interface along with the
type slot/port of the interface you want displayed. Type slot/
port options are the following:
• For a Fast Ethernet interface, enter the keyword
FastEthernet then the slot/port information.
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Optionally, enter an in or out parameter with the optional
interface:
• For Receive, enter in.
• For Transmit, enter out.
(OPTIONAL) Enter the keyword events to debug RSTP
events.
Rapid Spanning Tree Protocol (RSTP)