Multicast Source Discovery Protocol (Msdp) - Dell S6000 Reference Manual

Multicast Source Discovery Protocol
(MSDP)
Multicast source discovery protocol (MSDP) connects multiple PIM Sparse-Mode (PIM-SM) domains
together.
MSDP peers connect using TCP port 639. Peers send keepalives every 60 seconds. A peer connection is
reset after 75 seconds if no MSDP packets are received. MSDP connections are parallel with MBGP
connections.
The Dell Networking operating system supports MSDP commands on the S6000 platform.
clear ip msdp peer
Reset the TCP connection to the peer and clear all the peer statistics.
S6000
Syntax
clear ip msdp peer {peer address}
Parameters
peer address
Defaults Not configured.
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.1
Version 6.2.1.1
924
Enter the peer address in a dotted decimal format (A.B.C.D.)
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced

Multicast Source Discovery Protocol (MSDP)

31