Dell S6000 Reference Manual page 762

ip-address
mask
longer-prefixes
list prefix-list
protocol
process-id
routing-tag
connected
all
static
summary
Command
•
Modes
•
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
762
(OPTIONAL) Specify a name of a device or the IP address of
the device to view more detailed information about the
route.
(OPTIONAL) Specify the network mask of the route. Use this
parameter with the IP address parameter.
(OPTIONAL) Enter the keywords longer-prefixes to view
all routes with a common prefix.
(OPTIONAL) Enter the keyword list and the name of a
configured prefix list. For more information, refer to the
show ip route list
(OPTIONAL) Enter the name of a routing protocol (bgp,
isis, ospf, rip) or the keywords connected or static.
• If you enter bgp, you can include the BGP as-number .
• If you enter isis, you can include the ISIS routing-
tag.
• If you enter ospf, you can include the OSPF process-
id.
(OPTIONAL) Specify that only OSPF routes with a certain
process ID must be displayed.
(OPTIONAL) Specify that only ISIS routes with a certain
routing tag must be displayed.
(OPTIONAL) Enter the keyword connected to view only the
directly connected routes.
(OPTIONAL) Enter the keyword all to view both active and
non-active routes.
(OPTIONAL) Enter the keyword static to view only routes
the ip route command configures.
(OPTIONAL) Enter the keyword summary. For more
information, refer to the
EXEC
EXEC Privilege
Added support for VRF.
command.
NOTE: bgp, isis, ospf, and rip.
show ip route summary command.
IPv4 Routing