Clear Ip Rip - Dell S6000 Reference Manual

clear ip rip

Update all the RIP routes in the Dell Networking OS routing table.
S6000
Syntax
clear ip rip
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.6.1.0
pre-Version
6.2.1.1
Usage
This command triggers updates of the main RIP routing tables.
Information
debug ip rip
Examine RIP routing information for troubleshooting.
S6000
Syntax
debug ip rip [interface | database | events [interface] |
trigger]
To turn off debugging output, use the no debug ip rip command.
Parameters
interface
1162
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
(OPTIONAL) Enter the interface type and ID as one of the
following:
• For a Gigabit Ethernet interface, enter the keyword
GigabitEthernet then the slot/port information.
Routing Information Protocol (RIP)