Dell S6000 Reference Manual page 1004

level-1
level-1-2
level-2
metric metric-
value
metric-type
type-value
route-map
map-name
tag tag-value
Defaults Not configured.
Command ROUTER OSPF
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.5.1.0
pre-Version
6.1.1.1
1004
(OPTIONAL) Enter the keywords level-1 to redistribute
only IS-IS Level-1 routes.
(OPTIONAL) Enter the keywords level-1-2 to redistribute
both IS-IS Level-1 and Level-2 routes.
(OPTIONAL) Enter the keywords level-2 to redistribute
only IS-IS Level-2 routes.
(OPTIONAL) Enter the keyword metric then a number. The
range is from 0 (zero) to 4294967295.
(OPTIONAL) Enter the keywords metric-type then one of
the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
(OPTIONAL) Enter the keywords route-map then the name
of the route map.
(OPTIONAL) Enter the keyword tag to set the tag for routes
redistributed into OSPF. The range is from 0 to 4294967295.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for Multi-Process OSPF.
Introduced on the C-Series.
Introduced on the E-Series.
Open Shortest Path First (OSPFv2 and OSPFv3)