Offline Stack-Unit - Dell S6000 Reference Manual

verbose
testname
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 8.3.1.0
Version 7.7.1.0

offline stack-unit

Place a stack unit in the offline state.
S6000
Syntax
offline stack-unit number
Parameters
number
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
Debugging and Diagnostics
snake tests using VLAN configurations. To test 10G links,
physically remove the unit from the stack.
Enter the keyword verbose to run the diagnostic in Verbose
mode. Verbose mode gives more information in the output
than Standard mode.
Enter the keyword level2 to run a specific test case.
Enclose the test case name in double quotes (" "). For
example: diag stack-unit 1 level1 testname
"first".
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced the verbose option.
Introduced on the S-Series.
Enter the stack-unit id.
Range from 0 to 5.
505