Spanning-Tree - Dell S6000 Reference Manual

Field
Instance
Sts
Guard Type
Example
Dell#show spanning-tree msti 5 guard
(Guard)
Interface
Name
------------------------------------
Gi 0/1
Gi 0/2
Gi 0/3

spanning-tree

Enable the multiple spanning tree protocol on the interface.
S6000
Syntax
spanning-tree
To disable the multiple spanning tree protocol on the interface, use the no
spanning-tree command.
Parameters
spanning-tree
Defaults Enable.
Command INTERFACE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
952
Description
MSTP instance.
Port state: root-inconsistent (INCON Root), forwarding
(FWD), listening (LIS), blocking (BLK), or shut down (EDS
Shut).
Type of STP guard configured (Root, Loop, or BPDU guard).
Instance Sts Guard
5 INCON(Root)
5 FWD
5 EDS(Shut)
Enter the keywords spanning-tree to enable the MSTP on
the interface.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
type
Rootguard
Loopguard
Bpduguard
Multiple Spanning Tree Protocol (MSTP)