Test Cam-Usage - Dell S6000 Reference Manual

Command line for the system

Hide thumbs Also See for S6000:

Table of Contents

Dell(conf-if-te-0/8)#Service-class buffer shared-threshold-

weight queue5 4 queue7 6

test cam-usage

Check the Input Policy Map configuration for the CAM usage.

test cam-usage service-policy input policy-map stack-unit

{[number port-set portpipe number] | [all]}

stack-unit all

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version 9.0.2.0

Version 8.3.11.1

Version 8.3.7.0

This feature allows you to determine if the CAM has enough space available before

applying the configuration on an interface.

An input policy map with both Trust and Class-map configuration, the Class-map

rules are ignored and only the Trust rule is programmed in the CAM. In such an

instance, the Estimated CAM output column contains the size of the CAM space

required for the Trust rule and not the Class-map rule.

The following describes the test cam-usage service-policy input

policy-map stack-unit command shown in the following example.

Quality of Service (QoS)

Enter the policy map name.

(OPTIONAL) Enter the keyword stack-unit then the stack-

unit slot number.

Enter the keywords port-set then the stack-unit port pipe

number. The range is from 0 or 1.

(OPTIONAL) Enter the keywords stack-unit all to indicate

all stack-unit.

Introduced on the S6000.

Introduced on the S4820T.

Introduced on the Z9000.

Introduced on the S4810.