Test Procedure; Customer Diagnostics - Sirona Cerec AC Operating Instructions Manual

10 PC Diagnostic Tool
10.2 Test procedure
68
10.2

Test procedure

10.2.1

Customer Diagnostics

✔
You have started the "Customer Diagnostics" test and the
system configuration is displayed.
1. Using the information in the system configuration, check whether the
system corresponds to the default settings. You can scroll up and
down using the arrow keys.
Tip: The test starts automatically after 3 minutes if you do not press
an arrow key.
2. Press the "Esc" key on the keyboard.
 The test starts. The entire test run takes approx. 30 minutes.
Sirona Dental Systems GmbH
Operating Instructions for the Acquisition Unit
63 81 136 D3492
D3492.201.06.21.02 06.2017