10 Appendix
64
10.4.2
Test procedure
10.4.2.1
Customer Diagnostics
ü You have started the "Customer Diagnostics" test and the
system configuration is displayed.
1. Using the information in the system configuration, check whether
the system corresponds to the default settings. You can scroll up
and down using the arrow keys.
Tip: The test starts automatically after 3 minutes if you do not press
an arrow key.
2. Press the "Esc" key on the keyboard.
Ä The test starts. The entire test run takes approx. 20 minutes.
Operating Instructions for the Acquisition Unit CEREC AC Connect
Sirona Dental Systems GmbH