Honda ACCORD HYBRID 2005 Service Manual page 318

PGM-FI System
D T C T r o u b l e s h o o t i n g ( c o n t ' d )
13. Turn the ignition switch OFF.
14. Replace the MAF sensor/IAT sensor 1 (seepage
11-220).
15. Reconnect all connectors.
16. Turn the ignition switch ON (II).
17. Reset the PCM w i t h the HDS.
18. Do the PCM idle learn procedure (see page 11-340).
19. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P0103 is indicated, check for poor
connections or loose t e r m i n a l s at the MAF sensor
and the PCM, then go to step 1. If any other
Temporary DTCs or DTCs are indicated, go to the
indicated D T C s t r o u b l e s h o o t i n g .
NO—Troubleshooting is complete. •
20. Update the PCM if it does not have the latest
software, or substitute a k n o w n - g o o d PCM
(see page 11-6).
2 1 . Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P0103 is indicated, check for poor
connections or loose t e r m i n a l s at the MAF sensor
and the PCM, then go to step 1. If any other
T e m p o r a r y DTCs or DTCs are indicated, go to the
indicated D T C s t r o u b l e s h o o t i n g .
NO—If the PCM was updated, t r o u b l e s h o o t i n g is
complete. If the PCM was substituted, replace the
original PCM (see page 1 1 - 2 1 9 ) . •
11-78