14. Turn the ignition switch OFF.
15. Replace the MAF sensor/IAT sensor 1 (see page
11-220).
16. Turn the ignition switch ON (II).
17. Reset the PCM w i t h the HDS.
18. Do the PCM idle learn procedure (see page 11-340).
19. Test-drive the vehicle for several minutes in the
range of the recorded freeze data.
20. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary
DTCs
or DTCs
indicated?
Y E S — I f DTC P0101 is indicated, check for poor
connections or loose terminals at the MAF sensor
and the PCM, then go to step 1. If any other
T e m p o r a r y DTCs or DTCs are indicated, go to the
indicated D T C s t r o u b l e s h o o t i n g .
N O — G o t o step 2 1 .
2 1 . M o n i t o r the OBD STATUS for DTC P0101 in the
DTCs MENU w i t h the HDS.
Does the screen
indicate
PASSED?
Y E S — T r o u b l e s h o o t i n g is complete. •
NO—If the screen indicates FAILED, check for poor
connections or loose terminals at the MAF sensor
and the PCM, then go to step 1. If the screen
indicates NOT COMPLETED, go to step 19 and
recheck.
11-73