Honda ACCORD HYBRID 2005 Service Manual page 316

PGM-FI System
DTC Troubleshooting (cont'd)
18. Turn the ignition switch OFF.
19. Replace the MAF sensor/IAT sensor 1 (see page
11-220).
20. Reconnect all connectors.
2 1 . Turn the ignition switch ON (II).
22. Reset the PCM w i t h the HDS.
23. Do the PCM idle learn procedure (see page 11-340).
24. Check for T e m p o r a r y DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P0102 is indicated, check for poor
connections or loose t e r m i n a l s at the MAF sensor
and the PCM, then go to step 1. If any other
T e m p o r a r y DTCs or DTCs are indicated, go to the
indicated DTCs t r o u b l e s h o o t i n g .
NO—Troubleshooting is complete. •
25. Update the PCM if it does not have the latest
software, or substitute a k n o w n - g o o d PCM
(see page 11-6).
26. Check for Temporary DTCs or DTCs w i t h the HDS.
Are any Temporary DTCs or DTCs indicated?
Y E S — I f DTC P0102 is indicated, check for poor
connections or loose terminals at the MAF sensor
and the PCM, then go to step 1. If any other
T e m p o r a r y DTCs or DTCs are indicated, go to the
indicated D T C s t r o u b l e s h o o t i n g .
NO—If the PCM was updated, troubleshooting is
complete. If the PCM was substituted, replace the
original PCM (see page 1 1 - 2 1 9 ) . •
11-76